To make paper using a mold and deckle, you will need the following materials:
Hemp fibers or other fibers, such as cotton or flax
Water
A blender or food processor
A mold and deckle (or a frame with a screen or mesh)
A press or rolling pin
A drying rack or flat surface
Here are the steps for making paper using a mold and deckle:
Make sure you have all the materials you need, including hemp fibers, water, a blender or food processor, a mold and deckle (or a frame with a screen or mesh), a press or rolling pin, and a drying rack or flat surface.
To make paper, you will need to start with fibers that have been stripped of their outer bark and dried. You can purchase these fibers from a supplier or harvest them yourself by cutting the stalks of the hemp plant and stripping away the outer bark.
Once you have prepared the fibers, you will need to blend them into a pulp using a blender or food processor. Add a small amount of water to the fibers to help them blend together and create a uniform consistency. You can also cook them in an alkaline solution to soften them (simply add some baking soda to water).
The fibers are then pounded and mixed with water to create a slurry, which is poured onto a screen or mold. The screen or mold is then placed in a vat of water, and the water is drained through the screen, leaving a thin layer of fibers on the surface. This process is repeated until the desired thickness is achieved. After the paper is made, it is often pressed and dried with alternating layers of fabric.
Alternatively, you can form it into paper using an old picture frame with a screen or mesh in place of the glass. To do this, place the frame onto a flat surface, such as a table or counter. Pour the pulp onto the mold and deckle or frame and use a press or rolling pin to evenly distribute the pulp.
Once the paper has been evenly distributed, carefully lift the frame and flip it to remove the paper.If the paper is stuck to the frame, gently tap the mold to loosen it.
Once you have removed the paper from the mold and deckle (or frame), place it on a drying rack or flat surface to dry. You can also press the paper using a press or rolling pin with fabric to remove excess water and help it dry faster.
Once the paper is dry, you can repeat the process to make additional sheets of paper.
Making paper with a mold and deckle is a fun and rewarding process that allows you to create your own unique paper using a variety of fibers, including hemp. With a little practice, you can create high-quality paper that is strong, durable, and sustainable. If this seems a bit much, you can always purchase hemp paper here!
The post How to Make Hemp Paper appeared first on Cahaba Hemp Co..